Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Memorial?
Spring replacement in Memorial typically costs $180 to $340 for a single torsion spring, and most homes here have two springs that should be replaced as a matched pair, so a full pair usually runs about twice that range. The exact number depends on the spring size, the door’s weight, and whether the job is a straightforward swap or a full conversion. We give a free written estimate before any work starts, and that estimate sets the final price.
A broken spring is one of the few garage door failures that leaves you with no way to open the door safely by hand. The door becomes dead weight, and the opener will strain or strip trying to lift it. That’s why a broken spring is usually a same-day call, and why it’s a job we handle as a named, dedicated service rather than an afterthought. Call (877) 492-2056. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- One torsion spring: $180 – $340. A matched pair: roughly double.
- Extension springs and torsion springs price differently; most Memorial homes use torsion.
- We work on the door already on your home, across Clopay, Amarr, Wayne Dalton, Raynor, and more.
- Our technicians have up to 11 years of experience with spring systems and the openers above them.
- Free estimates, and the written estimate sets the final price. No surprises after the truck is loaded.
Spring Replacement Cost Breakdown (2026)
Here’s how the pieces of a spring job price out for the Memorial market. These are typical estimated ranges, not a quote. Your written estimate is what counts.
| Line Item | Typical Estimated Range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair of torsion springs | About twice the single-spring range |
| Cable repair (often needed with a spring failure) | $130 – $250 |
| Track realignment (if the door shifted off track) | $120 – $240 |
| Roller replacement (recommended when springs are done) | $110 – $220 |
| Opener repair (if the opener was strained by the broken spring) | $120 – $320 |
| Panel replacement (if the door dropped or bent) | $250 – $500 |
| General garage door repair | $150 – $600 |
What pushes a spring job toward the top of the range? Heavier doors, high-lift or unusual track configurations, doubled springs on oversized doors, and any collateral damage the failure caused. What keeps it low? A standard single-car or two-car door with a clean torsion setup and no cable or track damage. If the opener took a beating when the spring snapped, that adds a line item, which is why we diagnose the whole system before quoting rather than just swapping the spring.
If the door is old enough that the springs, cables, and rollers are all at end of life, sometimes the smarter money goes toward a replacement door rather than chasing repairs. New door installation runs $700 – $2,200 as a typical estimated range, and that’s worth weighing against a repair stack that keeps growing.
What Affects Spring Replacement Pricing in Memorial
- Spring type and size. Torsion springs (the horizontal ones above the door) and extension springs (the ones that run along the tracks) are priced and installed differently. Memorial homes lean heavily toward torsion, and spring sizing is matched to door weight, so a heavier wood door costs more than a lightweight steel one.
- Number of springs. A single spring is one line item. A matched pair, which most two-car doors use, is about double. We don’t quote one price for both because the parts and labor aren’t the same.
- Whether the door has other damage. When a spring breaks under load, the door can drop hard enough to bend a panel or knock a roller out of a track. We price those repairs separately and honestly, and only if they’re actually needed.
- Opener strain. A strained opener is common after a spring failure; the motor keeps running against a door it can’t lift. If your opener is a smart-connected LiftMaster, Chamberlain, Genie, or Craftsman unit, we diagnose it as its own job.
- Local housing and door age. Many Memorial homes have original or older doors where the springs have cycled well past their service life. Older hardware often means seized bolts and worn drums, which adds labor time compared to a newer, well-maintained door.
- Access and ceiling height. A tight garage with low clearance makes spring work slower and more careful. Standard-height garages are quicker.
We’re a garage door specialty company, so spring work isn’t a side job for us. Garage doors are our only business, and that focus shows in how we price and how we work. If you’d like the wider picture on how repairs fit together, our Garage Door Repair Memorial page covers the full range of services.
Why Spring Replacement Isn’t a DIY Repair
Torsion springs are under extreme tension, and if one lets go while you’re working on it, the energy releases instantly. Spring replacement is not a DIY repair, and that isn’t a sales line; it’s the safety reality the manufacturers themselves warn about. We include this section on a pricing page because the cost question and the safety question are really the same question: what’s it worth to have it done right the first time?
Our technicians have up to 11 years of experience winding and securing torsion systems safely, and they know how to match a spring to your exact door weight so the new one doesn’t fail early. That’s the part most people miss. A spring that’s slightly undersized for the door will break again, and a spring that’s oversized stresses the opener and cables. The right part, installed correctly, is what makes a spring job last.
If your door is stuck down with a broken spring, don’t force the opener. Call us and we’ll get a technician out. Call (877) 492-2056. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
How to Save on Spring Replacement
Spring pricing is fairly fixed by the parts and labor involved, but there are real ways to keep the total down.
- Replace the pair, not just the broken one. If you have two springs and only one has snapped, the other is almost certainly the same age and close to failing. Doing both at once avoids a second service visit and the second labor charge down the road.
- Catch the opener before it’s strained. If your spring has been broken for a while and you’ve been cycling the opener, you may be adding an opener repair. Stopping the opener use early protects it.
- Ask for a full-system check. We can flag worn rollers, cables, or track issues during the spring visit so you can decide what to address now and what can wait.
- Get a free written estimate. That’s the simplest one. No fee to find out what the job costs. Call (877) 492-2056.
- Compare repair against replacement honestly. On a door nearing end of life, putting money into springs and cables can be the wrong call. We’ll tell you plainly if that’s the case for your door.
Spring Replacement vs. New Door: Which Makes Sense?
For most Memorial homeowners, spring replacement is the right call: a well-built door with a failed spring is a fairly simple fix and gives you years more service. But there are situations where a new door makes better sense. If the door has bent panels, cracked sections, and a tired torsion system all at once, the repairs can stack close to the cost of a new door, which typically runs $700 – $2,200 installed. If you’re already considering an upgrade, it’s worth comparing the numbers side by side with us.
We install and service doors from Clopay, Amarr, Wayne Dalton, and Raynor, and we service openers from LiftMaster, Chamberlain, Genie, and Craftsman. If your door is one of those brands, we’re already familiar with the system in front of us. From a simple spring swap to a full replacement, we handle diagnosis, parts, repair, and installation ourselves.
When to Call for Spring Replacement
There are a few signs that point clearly to a spring problem and a call:
- A loud bang from the garage, often described as sounding like a gunshot.
- The door won’t lift, or lifts a few inches and stops.
- The opener strains, hums, or pulls the door unevenly.
- You can see a gap in a torsion spring coil or a stretched, sagging extension spring.
- The door feels unusually heavy when you try to lift it.
Any of those means it’s time for a professional look. Call (877) 492-2056. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Memorial?
Spring replacement in Memorial typically costs $180 – $340 for a single torsion spring, and a matched pair usually costs about twice that range. The written estimate you get before the work starts sets the final price. Call (877) 492-2056 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door with broken springs?
Repair is almost always cheaper for a door in otherwise good condition, at $180 – $340 for a single spring and roughly double for a pair. Replacement, at $700 – $2,200 typical estimated, only wins the math when the door also has bent panels, cracked sections, and a worn torsion system all at once. We’ll tell you which makes sense for your door, and the estimate is free.
Can you come today for a broken spring in Memorial?
Yes, same-day service is common for broken springs in the Memorial area, and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (877) 492-2056 and we’ll get you on the schedule.
Why is a spring pair so much more than a single spring?
A pair costs roughly twice a single spring because it’s twice the parts and twice the labor, and we replace both as a matched set. Replacing one spring on a door that needs two often leads to a second failure and a second visit. For a pair, expect about double the $180 – $340 single range.
What’s the difference between torsion and extension springs?
Torsion springs run horizontally above the door and are what most Memorial homes use; extension springs run along the side tracks. Both fail under tension and both are priced by door weight and job complexity, within the $180 – $340 single-spring range for typical residential doors. Whether your door has one type or the other, we service it. Call (877) 492-2056 to talk it through.
Book a Spring Replacement in Memorial
If your garage door is stuck and a spring has let go, don’t wait it out. We’re a garage door specialist focused on the work in front of us: diagnosis, parts, repair, and installation under one company. Our technicians have up to 11 years of experience with torsion and extension systems and the openers that ride above them. Call (877) 492-2056. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
If you’d like more detail on how the job works and the different spring types we handle, our spring replacement page covers it. And if you’re weighing a new door against a repair, we’ll give you both numbers in a free estimate so the decision is yours, made with clear facts.
Pricing reflects the Memorial market as of 2026. Garage Door Repair Memorial offers free estimates – call (877) 492-2056.
Written by the team at Garage Door Repair Memorial.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Terrence Mosley"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Norma Garcia"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Steve Meyer